Ultrasonic Misacceleration Mitigation System (UMS)
In order to help prevent collisions while parking, this system sounds a buzzer and displays a warning if front or rear sensors detect a nearby obstacle in your path. Engine output is also automatically controlled if you suddenly accelerate by accident.
Blind Spot Warning System (BSW)
Pulling out and changing lanes made safer
The Blind Spot Warning feature on the L200 uses ultrasonic sensors on the rear bumper in order to detect vehicles in your rear blind spots, on the right and left sides. When a vehicle is detected, a warning indicator appears on the door mirror on that side.
Multi Around View Monitor
Parking made simple
The Multi Around View Monitor on the L200 uses the views from cameras mounted on the front, rear and sides of the vehicle (including a bird's eye view) to reveal what is in blind spots in order to help you park more safely.
Forward Collision Mitigation System (FCM)
Rear-Cross Traffic Alert (RCTA)
Reverse with confidence
Explore more safety features
Keeping you in the correct lane
If you accidentally start to drift from your lane when travelling over 65km/h, the Lane Departure Warning (LDW) system detects this via a windshield camera and alerts you with an audible alarm and warning lamp.
An easier start on hills
When starting the L200 on a steep slope, the Hill Start Assist (HSA) system helps prevent you from rolling backwards while you release the brake by maintaining the braking force for up to two seconds until the acceleration is applied.
Confidence while towing
Trailer Stability Assist (TSA) increases stability when towing. If vehicle swaying is detected, it automatically controls engine power and the braking force to each wheel to stabilise the vehicle and trailer.
Safer driving at night
The L200 has Automatic High Beam. If an oncoming vehicle is detected, it automatically switches to low beam until the vehicle has safely passed. It then switches back up to high beam. So your hands stay on the wheel and you stay more in control.
7 SRS Airbag System
Protection for everyone in the L200
RISE Body Structure
Travel under armour
Collision safety performance is significantly enhanced by Mitsubishi Motors' RISE (Reinforced Impact Safety Evolution) body, which efficiently absorbs energy and maintains high cabin integrity in the event of a collision.
Rigid Lightweight Body
The body of the L200 is extremely sturdy, yet lightweight, due to the extensive use of high tensile strength steel plates. Along with the RISE body, this contributes to an increased level of passenger safety.
Equipment may vary by market. Please consult your local Mitsubishi Motors dealer/distributor for details.
UMS: The detection and control capabilities of the Ultrasonic misacceleration Mitigation System [UMS] are supplemental only and do not prevent misacceleration in every situation. Please drive safely and do not rely solely on this system while driving. To prevent the engine output control provided by UMS from causing an impediment during normal driving in rough-road driving conditions, the system automatically de-activates and indicates UMS OFF in the meter cluster when the 4LLc, R/D lock, or HDC setting is ON or the ASTC function is OFF. No function completely stops the vehicle via the automatic braking. The vehicle creeps forward even when engine output is regulated. The sensing system may not work for netlike and sharp-edged obstructions that do not sufficiently reflect ultrasonic sound. UMS does not include a function which keeps the vehicle stationary. The driver is responsible for stopping the vehicle by pressing the brake pedal as required by the driving conditions. The ultrasonic sensor wave graphics are for illustrative purposes only and do not represent the actual sensor application.
BSW: The detection and control capabilities of the Blind Spot Warning system [BSW] are supplemental only and do not warn you of vehicles in blind spots in every situation. Please do not rely solely on this system while driving. The blind spot monitor may not operate normally in some cases, depending on traffic, weather, road surface conditions and the presence of obstructions. Drivers are fully responsible for their own safe driving. The radar wave graphics are used for illustrative purposes only and do not represent the actual sensor application
FCM: The detection and control capabilities of Forward Collision Mitigation [FCM] are supplemental only and do not prevent collisions in every situation. Please drive safely and do not rely solely on this system while driving. FCM operates when a vehicle is in front of your vehicle. FCM is also designed to detect pedestrians, but may not detect them or be activated in some situations. Auto braking is activated for a car ahead when your vehicle is traveling at a speed of approx. 5km/h to 80km/h and for a pedestrian ahead at approx. 5km/h to 65km/h. Since FCM has no function to maintain braking, the brake is released approximately 2 seconds after stopping. To prevent the vehicle from rolling thereafter, the driver may have to hold the brake pedal down. In some cases, FCM may not function if the driver takes actions for accident avoidance through steering or acceleration operation. If you have any questions, please consult your local Mitsubishi Motors dealer/distributor for details.
RCTA: Do not rely solely on this system, which may not detect all moving vehicles in certain conditions. Drivers are fully responsible for their own safe driving. The radar wave graphics are for illustrative purposes only and do not represent the actual sensor application. Please see the owner’s manual for additional information.
LDW: Lane Departure Warning is not designed to lessen risks associated with not looking ahead carefully (attention drawn to something on the side, absentmindedness, etc.) or poor visibility caused by bad weather etc. Keep steering your vehicle correctly and drive safely. The system may not be able to detect the lane correctly in some conditions. Please see the owner’s manual for additional information.
HSA: Hill Start Assist [HSA] is not a substitute for safe driving. Never rely solely on this function while driving on steep roads. Your vehicle may move backwards if the brake pedal is not sufficiently depressed, or if the road is very steep or slippery. This function is not designed to keep the vehicle stopped in place on uphill slopes for more than 2 seconds. Do not rely on this function to maintain a stopped position as an alternative to depressing the brake pedal. Please see the owner’s manual for additional information.
AHB: This system activates at a speed of approx. 40km/h or more and deactivates at lower speeds. Please see the owner’s manual for additional information.
Airbags are part of a Supplemental Restraint System [SRS]. To decrease the risk of injury from a deploying airbag, always wear your seat belt, sit upright in the middle of the seat and do not lean against the door. Always place children 12 and under in the rear seat and use appropriate child restraints. Never place a rear-facing infant restraint in the front seat. Please see the owner’s manual and the instructions provided with your child restraint for additional information.
TSA: The control capabilities of Trailer Stability Assist [TSA] are supplemental only. Please drive safely and never rely solely on these functions while driving. Due to the slippery road surface, heavy side wind, inappropriate weight and positioning of luggage, and/or driving at high speed, the TSA system may fail to secure stability. Please see the owner’s manual for additional information.